Old Marlin vs New Marlin 30/30 — Did Ruger Get It Right? video from Old Man Life: Thoughts and Opinions.
Summary:
Forty-one years separate these two Marlin 336 lever-action rifles chambered in .30-30 Winchester.
Today I’m comparing my brother’s 1985 JM-stamped Marlin 336 CS, built by the original Marlin company, with my Ruger-made Marlin 336 Classic that shipped in early 2026.
Marlin has experienced some significant changes over the years, including the Remington ownership period and the return of Marlin production under Ruger.
But how does today’s Ruger-made Marlin compare with one built by the original Marlin company?
We’ll take a close look at the wood and stock designs, barrel lengths, sights, receiver differences, serial-number locations, loading gates, magazine capacity, lever actions, triggers, and how these two rifles feel when shooting.
One important detail: the older Marlin appears to have had its barrel shortened from its original factory configuration. Because of that, we’re not conducting an accuracy comparison. Instead, we’re focusing on handling, recoil, action smoothness, trigger feel, and the overall shooting experience.
This isn’t a claim that every rifle manufactured during one era is better than another. It’s a firsthand comparison of two particular Marlin 336 rifles manufactured 41 years apart.
And after spending some time with my brother’s old Marlin, I’ve developed a little problem of my own!
Do you prefer the original Marlin-made rifles or the newer Ruger-made Marlins? Share your thoughts and experiences in the comments.
Marlin Years to AVOID — the Exact Year the Quality Died video from Ivan's Journal.
Summary:
The two-second check that actually matters: the JM oval proof on the left side of the barrel for a Marlin-built gun versus the REP proof on the right for a Remington-built one, and why the proof mark beats the serial number, the box, or anything the seller tells you
Why the early Model 1893 and Model 36 belong to collectors, not hunters, and why 1948's Model 336 by L.L. Hepburn and T.R. Robinson Jr. is really where the modern story begins
Why the return of the 1894 in 1969, the .357 1894C in 1979, and the reborn 1972 .45-70 1895 (built on the 336 action, not a continuation of the original) round out the modern lineup, and why the pre-safety versus cross-bolt safety debate is a preference premium, not a quality grade
Why the most overlooked value on the used rack is the 1983 to 2007 North Haven era: mature tooling, a massive production run past four million 336s, full JM proof authenticity, priced low purely because of an ignored safety button
The real, misunderstood timeline of Remington's ownership: the 2007-2008 acquisition changed nothing on the North Haven shop floor, since North Haven kept building rifles with the same people and the same machines for years afterward
Why April 2011, not 2007, is the year that actually matters: the North Haven plant closing, the tooling's difficult move to Ilion, New York, and the specific, crucial detail that the skilled people who knew how to coax good work out of aging machines mostly didn't make the move with it
The well-documented pattern of quality complaints from roughly 2011 to 2013, canted sights, gapped tangs, rough actions, treated honestly as strong owner and dealer consensus rather than an official manufacturer admission
Why the barrel stamp still isn't a perfectly clean answer, since some transition-era rifles carry North Haven barrels finished with Remington proofs
The real reversal almost nobody accounts for: how quality recovered by 2015-2016, leaving later Remlins carrying a reputation earned by earlier ones, and why a well-inspected 2016 rifle can be a better buy than a worn 1975 JM gun
Ruger's 2020 bankruptcy-court acquisition of Marlin's assets, tooling and trademarks only, no buildings or workforce, and why that should have repeated the 2011 disaster but apparently didn't
What actually shipped from the new Mayodan, North Carolina plant starting in 2021, the 1895 SBL, the 2023 336 Classic, the 1894 Classic, and the honest consensus that these new rifles often match or beat the old JM guns, with real caveats about heavy factory trigger pulls
What's still missing entirely: the Model 39, continuously produced since 1922 and once the longest continuously produced shoulder-fired rifle in the world, currently not in Ruger's lineup at all
If you're standing at a counter needing one number: it's 2011, not 2007, because the building closed, not because the company sold. The worst Marlins ever built and the best Marlins ever built are separated by about ten years, same design, same drawings, same cartridge, and the entire difference came down to who was standing at the machines and how much they knew.
If you sold a Marlin because of the date on the paperwork and have been quietly regretting it, tell me which one.
Everyone Wants a Winchester 94... But They're Missing This video by Frontier Files.
Summary:
Ask any hunter which lever action rifle won the West and he says the Winchester Model 94. He is right about the sales and wrong about the gun. The Marlin Model 336 in 30-30 usually wins.
Eight rounds, judged on what a hunter actually pays for. Browning's 1894 lockup against Marlin's solid top receiver. Top ejection that fights a scope against side ejection that never had the argument. Micro-Groove rifling, the 35 Remington, the post-64 collapse, the Remlin years, and the Ruger comeback out of Mayodan. Then the round everyone came for: Roosevelt, Coolidge, Truman, Eisenhower and a hangman's rifle in a museum case.
There is a 30-30 in an awful lot of American closets. Tell us in the comments which one is in yours, then subscribe for the real hardware told straight.
Comparing the Model 94 Winchester and 336 Marlin video by GunBlue490.
Summary:
While both are flat sided, lever action, tubular fed woods carbines, each have distinct features that have fulfilled the different needs of shooters for 130 years. See what these distinct differences are and how one of these historic guns may appeal to you!